Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

rx320.c

/*
 *  Hamlib TenTenc backend - RX-320 PC-Radio description
 *  Copyright (c) 2001-2008 by Stephane Fillod
 *
 *    $Id: rx320.c,v 1.10 2008/12/03 22:36:34 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "tentec.h"


#define RX320_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)

/* TODO: LINEOUT */
#define RX320_LEVELS (RIG_LEVEL_AGC|RIG_LEVEL_AF|RIG_LEVEL_IF|RIG_LEVEL_RAWSTR|RIG_LEVEL_CWPITCH)

#define RX320_VFO (RIG_VFO_A)

/* 
 * Modified 11/18/2008, Josh Rovero, KK1D
 * Calibration via comparison with JRC NRD-525.  
 * Highy non-linear....
 */
#define RX320_STR_CAL { 13, { \
            {      0, -40 }, \
            {     50, -20 }, \
            {    100, -10 }, \
            {    200, -5 }, \
            {    225, -3 }, \
            {    256,  0 }, \
            {    512,  1 }, \
            {    768,  3}, \
            {   1024,  4 }, \
            {   1280,  5 }, \
            {   2560,  10 }, \
            {   5120,  20 }, \
            {  10000,  30 }, \
      } }

/*
 * rx320 receiver capabilities.
 *
 * protocol is documented at 
 *          http://www.tentec.com/rx320prg.zip
 *
 * TODO:
 */
const struct rig_caps rx320_caps = {
.rig_model =  RIG_MODEL_RX320,
.model_name = "RX-320",
.mfg_name =  "Ten-Tec",
.version =  "0.5",
.copyright =  "LGPL",
.status =  RIG_STATUS_BETA,
.rig_type =  RIG_TYPE_PCRECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  1200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,

/*
 * Added S-meter read support, Josh Rovero KK1D 
 * Only get_level is for RIG_LEVEL_RAWSTR 
 */
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE,
.has_get_level =  RIG_LEVEL_RAWSTR,
.has_set_level =  RIG_LEVEL_SET(RX320_LEVELS),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran = {
      [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 10000 } },
      [LVL_AF] = { .step = { .f = 1.0/64 } },
    [LVL_IF] = { .min = { .i = -2000 }, .max = { .i = 2000 }, .step = { .i = 10} }, 
    [LVL_CWPITCH] = { .min = { .i = 0}, .max = { .i = 2000 }, .step = { .i = 100} }
},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  kHz(2),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
                  RIG_CHAN_END,
            },

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
      {kHz(100),MHz(30),RX320_MODES,-1,-1,RX320_VFO},
      RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },
.tuning_steps =  {
       {RX320_MODES,10},      /* FIXME: add other ts */
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
        {RIG_MODE_CW, 300},
        {RIG_MODE_CW, 450},
        {RIG_MODE_CW, 600},
        {RIG_MODE_CW, 750},
        {RIG_MODE_CW, 900},
        {RIG_MODE_CW, kHz(1.2)},
        {RIG_MODE_SSB|RIG_MODE_CW, kHz(1.5)},
        {RIG_MODE_SSB|RIG_MODE_CW, kHz(1.8)},
        {RIG_MODE_SSB|RIG_MODE_CW, kHz(2.1)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(2.4)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(3.0)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(4.2)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(5.1)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(6)},
        {RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_CW, kHz(8)},
        RIG_FLT_END,
      },
.str_cal = RX320_STR_CAL,

.rig_init =  tentec_init,
.rig_cleanup =  tentec_cleanup,
.set_freq =  tentec_set_freq,
.get_freq =  tentec_get_freq,
.set_mode =  tentec_set_mode,
.get_mode =  tentec_get_mode,
.set_level =  tentec_set_level,
.get_level =  tentec_get_level,
.get_info =  tentec_get_info,

};

/*
 * Function definitions below
 */


Generated by  Doxygen 1.6.0   Back to index