Logo Search packages:      
Sourcecode: hamlib version File versions

ar8600.c

/*
 *  Hamlib AOR backend - AR8600 description
 *  Copyright (c) 2000-2008 by Stephane Fillod
 *
 *    $Id: ar8600.c,v 1.3 2008/04/11 17:10:45 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "aor.h"


#define AR8600_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)

#define AR8600_FUNC (RIG_FUNC_TSQL|RIG_FUNC_ABM|RIG_FUNC_AFC)

#define AR8600_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)

#define AR8600_PARM (RIG_PARM_APO|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)

#define AR8600_VFO_OPS (RIG_OP_MCL|RIG_OP_UP|RIG_OP_DOWN|RIG_OP_LEFT|RIG_OP_RIGHT)
#define AR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_SLCT)

#define AR8600_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)

/* TODO: measure and report real values */
#define AR8600_STR_CAL { 2, \
      { \
            {  0x00, -60 }, \
            {  0xff, 60 } \
      } }

#define AR8600_MEM_CAP {      \
      .freq = 1,  \
      .mode = 1,  \
      .width = 1, \
      .bank_num = 1,    \
      .tuning_step = 1, \
      .channel_desc = 1,      \
      .flags = 1, \
      .levels = RIG_LEVEL_ATT,      \
      .funcs = RIG_FUNC_ABM,  \
}

static const struct aor_priv_caps ar8600_priv_caps = {
      .format_mode = format8k_mode,
      .parse_aor_mode = parse8k_aor_mode,
      .bank_base1 = 'A',
      .bank_base2 = 'a',
};


/*
 * ar8600 rig capabilities.
 * Notice that some rigs share the same functions.
 * Also this struct is READONLY!
 *
 * part of info from http://www.aoruk.com/8600.htm
 */
const struct rig_caps ar8600_caps = {
.rig_model =  RIG_MODEL_AR8600,
.model_name = "AR8600",
.mfg_name =  "AOR",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_BETA,
.rig_type =  RIG_TYPE_SCANNER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  2,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_XONXOFF,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  AR8600_FUNC,
.has_get_level =  AR8600_LEVEL,
.has_set_level =  RIG_LEVEL_SET(AR8600_LEVEL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,    /* FIXME: parms */
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,                      /* FIXME: CTCSS list */
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },   /* TBC */
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_RIG,
.bank_qty =   20, /* A through J, and a trough j */
.chan_desc_sz =  12,
.vfo_ops =  AR8600_VFO_OPS,
.scan_ops =  AR8600_SCAN_OPS,
.str_cal = AR8600_STR_CAL,

.chan_list =  {
      {   0,  999, RIG_MTYPE_MEM, AR8600_MEM_CAP },   /* flat space */
        RIG_CHAN_END, },

.rx_range_list1 =  {
      {kHz(100),MHz(2040),AR8600_MODES,-1,-1,AR8600_VFO_ALL},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
      {kHz(100),MHz(2040),AR8600_MODES,-1,-1,AR8600_VFO_ALL},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  { RIG_FRNG_END, },     /* no tx range, this is a scanner! */

.tuning_steps =  {
       {AR8600_MODES,50},
       {AR8600_MODES,100},
       {AR8600_MODES,kHz(1)},
       {AR8600_MODES,kHz(5)},
       {AR8600_MODES,kHz(9)},
       {AR8600_MODES,kHz(10)},
       {AR8600_MODES,12500},
       {AR8600_MODES,kHz(20)},
       {AR8600_MODES,kHz(25)},
       {AR8600_MODES,kHz(100)},
       {AR8600_MODES,MHz(1)},
#if 0 
       {AR8600_MODES,0},      /* any tuning step */
#endif
       RIG_TS_END,
      },
        /* mode/filter list, .remember =  order matters! */
.filters =  {
        /* mode/filter list, .remember =  order matters! */
            {RIG_MODE_AM, kHz(9)},
            {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_AM, kHz(3)}, 
            {RIG_MODE_FM|RIG_MODE_AM, kHz(12)}, 
            {RIG_MODE_FM, kHz(9)}, 
            {RIG_MODE_WFM, kHz(230)}, /* 150kHz at -3dB, 380kHz at -20dB */
            RIG_FLT_END,
      },

.priv = (void*)&ar8600_priv_caps,

.rig_init =  NULL,
.rig_cleanup =  NULL,
.rig_open =  NULL,
.rig_close =  aor_close,

.set_freq =  aor_set_freq,
.get_freq =  aor_get_freq,
.set_vfo =  aor_set_vfo,
.get_vfo =  aor_get_vfo,
.set_mode =  aor_set_mode,
.get_mode =  aor_get_mode,

.set_level = aor_set_level,
.get_level = aor_get_level,
.get_dcd = aor_get_dcd,

.set_ts =  aor_set_ts,
.set_powerstat =  aor_set_powerstat,
.vfo_op =  aor_vfo_op,
.scan =  aor_scan,
.get_info =  aor_get_info,

.set_mem = aor_set_mem,
.get_mem = aor_get_mem,
.set_bank = aor_set_bank,

.set_channel = aor_set_channel,
.get_channel = aor_get_channel,

.get_chan_all_cb = aor_get_chan_all_cb,

};

/*
 * Function definitions below
 */



Generated by  Doxygen 1.6.0   Back to index