#include <rig.h>
Basic rig type, can store some useful info about different radios. Each lib must be able to populate this structure, so we can make useful inquiries about capabilities.
The main idea of this struct is that it will be defined by the backend rig driver, and will remain readonly for the application. Fields that need to be modifiable by the application are copied into the struct rig_state, which is a kind of private of the RIG instance. This way, you can have several rigs running within the same application, sharing the struct rig_caps of the backend, while keeping their own customized data. NB: don't move fields around, as backend depends on it when initializing their caps.
Definition at line 1088 of file rig.h.
Public Attributes | |
| ann_t | announces |
| int | attenuator [MAXDBLSTSIZ] |
| int | bank_qty |
| struct confparams * | cfgparams |
| int | chan_desc_sz |
| chan_t | chan_list [CHANLSTSIZ] |
| const char * | clone_combo_get |
| const char * | clone_combo_set |
| const char * | copyright |
| const tone_t * | ctcss_list |
| dcd_type_t | dcd_type |
| const tone_t * | dcs_list |
| int(* | decode_event )(RIG *rig) |
| struct confparams * | extlevels |
| struct confparams * | extparms |
| struct filter_list | filters [FLTLSTSIZ] |
| int(* | get_ant )(RIG *rig, vfo_t vfo, ant_t *ant) |
| int(* | get_chan_all_cb )(RIG *rig, chan_cb_t chan_cb, rig_ptr_t) |
| int(* | get_channel )(RIG *rig, channel_t *chan) |
| int(* | get_conf )(RIG *rig, token_t token, char *val) |
| int(* | get_ctcss_sql )(RIG *rig, vfo_t vfo, tone_t *tone) |
| int(* | get_ctcss_tone )(RIG *rig, vfo_t vfo, tone_t *tone) |
| int(* | get_dcd )(RIG *rig, vfo_t vfo, dcd_t *dcd) |
| int(* | get_dcs_code )(RIG *rig, vfo_t vfo, tone_t *code) |
| int(* | get_dcs_sql )(RIG *rig, vfo_t vfo, tone_t *code) |
| int(* | get_ext_level )(RIG *rig, vfo_t vfo, token_t token, value_t *val) |
| int(* | get_ext_parm )(RIG *rig, token_t token, value_t *val) |
| int(* | get_freq )(RIG *rig, vfo_t vfo, freq_t *freq) |
| int(* | get_func )(RIG *rig, vfo_t vfo, setting_t func, int *status) |
| const char *(* | get_info )(RIG *rig) |
| int(* | get_level )(RIG *rig, vfo_t vfo, setting_t level, value_t *val) |
| int(* | get_mem )(RIG *rig, vfo_t vfo, int *ch) |
| int(* | get_mem_all_cb )(RIG *rig, chan_cb_t chan_cb, confval_cb_t parm_cb, rig_ptr_t) |
| int(* | get_mode )(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) |
| int(* | get_parm )(RIG *rig, setting_t parm, value_t *val) |
| int(* | get_powerstat )(RIG *rig, powerstat_t *status) |
| int(* | get_ptt )(RIG *rig, vfo_t vfo, ptt_t *ptt) |
| int(* | get_rit )(RIG *rig, vfo_t vfo, shortfreq_t *rit) |
| int(* | get_rptr_offs )(RIG *rig, vfo_t vfo, shortfreq_t *offs) |
| int(* | get_rptr_shift )(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift) |
| int(* | get_split_freq )(RIG *rig, vfo_t vfo, freq_t *tx_freq) |
| int(* | get_split_mode )(RIG *rig, vfo_t vfo, rmode_t *tx_mode, pbwidth_t *tx_width) |
| int(* | get_split_vfo )(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo) |
| int(* | get_tone )(RIG *rig, vfo_t vfo, tone_t *tone) |
| int(* | get_tone_sql )(RIG *rig, vfo_t vfo, tone_t *tone) |
| int(* | get_trn )(RIG *rig, int *trn) |
| int(* | get_ts )(RIG *rig, vfo_t vfo, shortfreq_t *ts) |
| int(* | get_vfo )(RIG *rig, vfo_t *vfo) |
| int(* | get_xit )(RIG *rig, vfo_t vfo, shortfreq_t *xit) |
| setting_t | has_get_func |
| setting_t | has_get_level |
| setting_t | has_get_parm |
| setting_t | has_set_func |
| setting_t | has_set_level |
| setting_t | has_set_parm |
| gran_t | level_gran [RIG_SETTING_MAX] |
| shortfreq_t | max_ifshift |
| shortfreq_t | max_rit |
| shortfreq_t | max_xit |
| const char * | mfg_name |
| const char * | model_name |
| int(* | mW2power )(RIG *rig, float *power, unsigned int mwpower, freq_t freq, rmode_t mode) |
| gran_t | parm_gran [RIG_SETTING_MAX] |
| rig_port_t | port_type |
| int | post_write_delay |
| int(* | power2mW )(RIG *rig, unsigned int *mwpower, float power, freq_t freq, rmode_t mode) |
| int | preamp [MAXDBLSTSIZ] |
| const rig_ptr_t | priv |
| ptt_type_t | ptt_type |
| int(* | recv_dtmf )(RIG *rig, vfo_t vfo, char *digits, int *length) |
| int(* | reset )(RIG *rig, reset_t reset) |
| int | retry |
| int(* | rig_cleanup )(RIG *rig) |
| int(* | rig_close )(RIG *rig) |
| int(* | rig_init )(RIG *rig) |
| rig_model_t | rig_model |
| int(* | rig_open )(RIG *rig) |
| int | rig_type |
| freq_range_t | rx_range_list1 [FRQRANGESIZ] |
| freq_range_t | rx_range_list2 [FRQRANGESIZ] |
| int(* | scan )(RIG *rig, vfo_t vfo, scan_t scan, int ch) |
| scan_t | scan_ops |
| int(* | send_dtmf )(RIG *rig, vfo_t vfo, const char *digits) |
| int(* | send_morse )(RIG *rig, vfo_t vfo, const char *msg) |
| int | serial_data_bits |
| enum serial_handshake_e | serial_handshake |
| enum serial_parity_e | serial_parity |
| int | serial_rate_max |
| int | serial_rate_min |
| int | serial_stop_bits |
| int(* | set_ant )(RIG *rig, vfo_t vfo, ant_t ant) |
| int(* | set_bank )(RIG *rig, vfo_t vfo, int bank) |
| int(* | set_chan_all_cb )(RIG *rig, chan_cb_t chan_cb, rig_ptr_t) |
| int(* | set_channel )(RIG *rig, const channel_t *chan) |
| int(* | set_conf )(RIG *rig, token_t token, const char *val) |
| int(* | set_ctcss_sql )(RIG *rig, vfo_t vfo, tone_t tone) |
| int(* | set_ctcss_tone )(RIG *rig, vfo_t vfo, tone_t tone) |
| int(* | set_dcs_code )(RIG *rig, vfo_t vfo, tone_t code) |
| int(* | set_dcs_sql )(RIG *rig, vfo_t vfo, tone_t code) |
| int(* | set_ext_level )(RIG *rig, vfo_t vfo, token_t token, value_t val) |
| int(* | set_ext_parm )(RIG *rig, token_t token, value_t val) |
| int(* | set_freq )(RIG *rig, vfo_t vfo, freq_t freq) |
| int(* | set_func )(RIG *rig, vfo_t vfo, setting_t func, int status) |
| int(* | set_level )(RIG *rig, vfo_t vfo, setting_t level, value_t val) |
| int(* | set_mem )(RIG *rig, vfo_t vfo, int ch) |
| int(* | set_mem_all_cb )(RIG *rig, chan_cb_t chan_cb, confval_cb_t parm_cb, rig_ptr_t) |
| int(* | set_mode )(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) |
| int(* | set_parm )(RIG *rig, setting_t parm, value_t val) |
| int(* | set_powerstat )(RIG *rig, powerstat_t status) |
| int(* | set_ptt )(RIG *rig, vfo_t vfo, ptt_t ptt) |
| int(* | set_rit )(RIG *rig, vfo_t vfo, shortfreq_t rit) |
| int(* | set_rptr_offs )(RIG *rig, vfo_t vfo, shortfreq_t offs) |
| int(* | set_rptr_shift )(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift) |
| int(* | set_split_freq )(RIG *rig, vfo_t vfo, freq_t tx_freq) |
| int(* | set_split_mode )(RIG *rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width) |
| int(* | set_split_vfo )(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo) |
| int(* | set_tone )(RIG *rig, vfo_t vfo, tone_t tone) |
| int(* | set_tone_sql )(RIG *rig, vfo_t vfo, tone_t tone) |
| int(* | set_trn )(RIG *rig, int trn) |
| int(* | set_ts )(RIG *rig, vfo_t vfo, shortfreq_t ts) |
| int(* | set_vfo )(RIG *rig, vfo_t vfo) |
| int(* | set_xit )(RIG *rig, vfo_t vfo, shortfreq_t xit) |
| enum rig_status_e | status |
| cal_table_t | str_cal |
| int | targetable_vfo |
| int | timeout |
| int | transceive |
| struct tuning_step_list | tuning_steps [TSLSTSIZ] |
| freq_range_t | tx_range_list1 [FRQRANGESIZ] |
| freq_range_t | tx_range_list2 [FRQRANGESIZ] |
| const char * | version |
| int(* | vfo_op )(RIG *rig, vfo_t vfo, vfo_op_t op) |
| vfo_op_t | vfo_ops |
| int | write_delay |