Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

icr10.c

/*
 *  Hamlib CI-V backend - description of IC-R10
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *    $Id: icr10.c,v 1.3 2004/09/26 08:35:03 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"

#define ICR10_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)

#define ICR10_FUNC_ALL (RIG_FUNC_NONE)

#define ICR10_LEVEL_ALL (RIG_LEVEL_RAWSTR)

#define ICR10_VFO_ALL (RIG_VFO_A)

#define ICR10_VFO_OPS (RIG_OP_NONE)
#define ICR10_SCAN_OPS (RIG_SCAN_NONE)

/*
 * FIXME: S-meter measurement
 */
#define ICR10_STR_CAL UNKNOWN_IC_STR_CAL

static const struct icom_priv_caps icr10_priv_caps = { 
            0x52, /* default address */
            0,          /* 731 mode */
            r8500_ts_sc_list  /* wrong, but don't have set_ts anyway */
};

const struct rig_caps icr10_caps = {
.rig_model =  RIG_MODEL_ICR10,
.model_name = "IC-R10", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER, 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER|RIG_FLAG_HANDHELD,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  ICR10_FUNC_ALL,
.has_set_func =  ICR10_FUNC_ALL, 
.has_get_level =  ICR10_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(ICR10_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,     /* FIXME: parms */
.level_gran = {
      [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  ICR10_VFO_OPS,
.scan_ops =  ICR10_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
               RIG_CHAN_END,
            },

.rx_range_list1 =   {
      {kHz(500),GHz(1.3),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
      RIG_FRNG_END, },
.tx_range_list1 =   { RIG_FRNG_END, },

.rx_range_list2 =   {
      {kHz(500),MHz(823.9999),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
      {MHz(849),MHz(868.9999),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
      {MHz(894),GHz(1.3),ICR10_MODES,-1,-1,ICR10_VFO_ALL},
      RIG_FRNG_END, },
.tx_range_list2 =   { RIG_FRNG_END, },

.tuning_steps =   {
       {ICR10_MODES,Hz(100)},
       RIG_TS_END,
      },
      /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_SSB|RIG_MODE_CW, kHz(4)},
            {RIG_MODE_AM|RIG_MODE_FM, kHz(15)},
            {RIG_MODE_WFM, kHz(150)},
            RIG_FLT_END,
      },
.str_cal = ICR10_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&icr10_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,   /* TODO: do not pass bandwidth data */
.get_mode =  icom_get_mode,
/* .set_vfo =  icom_set_vfo, */

.decode_event =  icom_decode_event,
.get_level =  icom_get_level,
.get_dcd =  icom_get_dcd,

};



Generated by  Doxygen 1.6.0   Back to index