Logo Search packages:      
Sourcecode: hamlib version File versions

pcr1000.c

/*
 *  Hamlib PCR backend - PCR-1000 description
 *  Copyright (c) 2001-2003 by Stephane Fillod and Darren Hatcher
 *
 *    $Id: pcr1000.c,v 1.10 2005/04/03 20:18:30 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>

#include "pcr.h"


/* used in pcr_set_mode */
#define PCR1000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)

/* used in pcr_set_func */
#define PCR1000_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_NR)

/* used in pcr_set_level */
#define PCR1000_LEVEL (RIG_LEVEL_ATT | RIG_LEVEL_AF | RIG_LEVEL_SQL | RIG_LEVEL_IF | \
                       RIG_LEVEL_AGC | RIG_LEVEL_NR)

/*
 * IC PCR1000 rigs capabilities.
 */
const struct rig_caps pcr1000_caps = {
.rig_model = RIG_MODEL_PCR1000,
.model_name = "IC-PCR1000",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_PCRECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,

.has_get_func = PCR1000_FUNC,
.has_set_func = PCR1000_FUNC,
.has_get_level = PCR1000_LEVEL,
.has_set_level = RIG_LEVEL_SET(PCR1000_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,    /* FIXME: parms */
.level_gran = {},                 /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = pcr1_ctcss_list,
.dcs_list = NULL,
.preamp =  { RIG_DBLST_END, },
.attenuator =  { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(1.2),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty =  0,
.chan_desc_sz = 0,

.chan_list = { RIG_CHAN_END, },     /* no memory channel list: this is a PC receiver */

.rx_range_list1 = { {kHz(10),GHz(1.3),PCR1000_MODES,-1,-1,RIG_VFO_A},
      RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { {kHz(10),MHz(824)-10,PCR1000_MODES,-1,-1,RIG_VFO_A},
    {MHz(849)+10,MHz(869)-10,PCR1000_MODES,-1,-1,RIG_VFO_A},
    {MHz(894)+10,GHz(1.3),PCR1000_MODES,-1,-1,RIG_VFO_A},
      RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, },      /* no TX ranges, this is a receiver */

.tuning_steps = {
        { PCR1000_MODES,Hz(1) },
        RIG_TS_END,
      },
            /* mode/filter list, remember: order matters! */
.filters = {
            {RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_AM, kHz(2.8)},
            {RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
            {RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
            {RIG_MODE_WFM|RIG_MODE_FM|RIG_MODE_AM, kHz(50)},
            {RIG_MODE_WFM, kHz(230)},
            RIG_FLT_END,
  },
.priv = NULL,     /* priv */

.rig_init = pcr_init,
.rig_cleanup = pcr_cleanup,
.rig_open = pcr_open,
.rig_close = pcr_close,

.set_freq = pcr_set_freq,
.get_freq = pcr_get_freq,
.set_mode = pcr_set_mode,
.get_mode = pcr_get_mode,

.get_info = pcr_get_info,

.set_level = pcr_set_level,
.get_level = pcr_get_level,
.set_func = pcr_set_func,
.get_func = pcr_get_func,

  /*
   * TODO:
   * set_trn, set_powerstat,
   * set_level ATT?
   * set_func: NB,TSQL, VSC?
   * get_level, get_dcd, dtmf, ..
   * decode_event, set_ctcss, set_ctcss_sql
   * and also all the associated get_ functions.
   */
};


Generated by  Doxygen 1.6.0   Back to index