Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

ts711.c

/*
 *  Hamlib Kenwood backend - TS-711 description
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *    $Id: ts711.c,v 1.5 2005/04/04 21:31:56 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"


#define TS711_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)

/* func and levels to be checked */
#define TS711_FUNC_ALL (RIG_FUNC_TSQL|RIG_FUNC_LOCK|RIG_FUNC_MUTE)

#define TS711_LEVEL_ALL (RIG_LEVEL_STRENGTH)

#define TS711_VFO (RIG_VFO_A|RIG_VFO_B)

#define TS711_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
#define TS711_SCAN_OP (RIG_SCAN_VFO)

static const struct kenwood_priv_caps  ts711_priv_caps  = {
      .cmdtrm =  EOM_KEN,
      .if_len =  29,
};

/*
 * ts711 rig capabilities.
 *
 * specs: http://www.qsl.net/sm7vhs/radio/kenwood/ts711/specs.htm
 *
 * TODO: protocol to be check with manual!
 */
const struct rig_caps ts711_caps = {
.rig_model =  RIG_MODEL_TS711,
.model_name = "TS-711",
.mfg_name =  "Kenwood",
.version =  BACKEND_VER "." IC10_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  4800,
.serial_data_bits =  8,
.serial_stop_bits =  2,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  1000,
.retry =  3,

.has_get_func =  TS711_FUNC_ALL,
.has_set_func =  TS711_FUNC_ALL,
.has_get_level =  TS711_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(TS711_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.vfo_ops =  TS711_VFO_OP,
.scan_ops =  TS711_SCAN_OP,
.ctcss_list =  kenwood38_ctcss_list,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  kHz(9.9),
.max_xit =  0,
.max_ifshift =  0,
.targetable_vfo =  RIG_TARGETABLE_FREQ,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

      /* FIXME: split memories, call channel, etc. */
.chan_list =  { {  1, 59, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} },
                   RIG_CHAN_END,
               },

.rx_range_list1 =  {
      {MHz(144),MHz(146),TS711_ALL_MODES,-1,-1,TS711_VFO},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list1 =  {
    {MHz(144),MHz(146),TS711_ALL_MODES,W(5),W(25),TS711_VFO},
      RIG_FRNG_END,
  }, /* tx range */

.rx_range_list2 =  {
      {MHz(144),MHz(148),TS711_ALL_MODES,-1,-1,TS711_VFO},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  {
    {MHz(144),MHz(148),TS711_ALL_MODES,W(5),W(25),TS711_VFO},
      RIG_FRNG_END,
  }, /* tx range */


.tuning_steps =  {
       {TS711_ALL_MODES,50},
       {TS711_ALL_MODES,100},
       {TS711_ALL_MODES,kHz(1)},
       {TS711_ALL_MODES,kHz(5)},
       {TS711_ALL_MODES,kHz(9)},
       {TS711_ALL_MODES,kHz(10)},
       {TS711_ALL_MODES,12500},
       {TS711_ALL_MODES,kHz(20)},
       {TS711_ALL_MODES,kHz(25)},
       {TS711_ALL_MODES,kHz(100)},
       {TS711_ALL_MODES,MHz(1)},
       {TS711_ALL_MODES,0},   /* any tuning step */
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_SSB|RIG_MODE_CW, kHz(2.2)},
            {RIG_MODE_FM, kHz(12)},
            RIG_FLT_END,
      },
.priv =  (void *)&ts711_priv_caps,

.set_freq =  kenwood_set_freq,
.get_freq =  ic10_get_freq,
.set_rit =  kenwood_set_rit,
.get_rit =  kenwood_get_rit,
.set_xit =  kenwood_set_xit,
.get_xit =  kenwood_get_xit,
.set_mode =  kenwood_set_mode,
.get_mode =  ic10_get_mode,
.set_vfo =  ic10_set_vfo,
.get_vfo =  ic10_get_vfo,
.set_split_vfo =  ic10_set_split_vfo,
.get_split_vfo =  ic10_get_split_vfo,
.set_ptt =  kenwood_set_ptt,
.get_ptt =  ic10_get_ptt,
.set_func =  kenwood_set_func,
.get_func =  kenwood_get_func,
.vfo_op =  kenwood_vfo_op,
.set_mem =  kenwood_set_mem,
.get_mem =  ic10_get_mem,
.set_trn =  kenwood_set_trn,
.scan =  kenwood_scan,
.set_ctcss_tone =  kenwood_set_ctcss_tone,
.get_ctcss_tone =  kenwood_get_ctcss_tone,
.set_level =  kenwood_set_level,
.get_level =  kenwood_get_level,
.set_channel = ic10_set_channel,
.get_channel = ic10_get_channel,
.decode_event = ic10_decode_event,

};

/*
 * Function definitions below
 */


Generated by  Doxygen 1.6.0   Back to index