Logo Search packages:      
Sourcecode: hamlib version File versions

usrp.c

/*
 *  Hamlib KIT backend - Universal Software Radio Peripheral description
 *  Copyright (c) 2005 by Stephane Fillod
 *
 *    $Id: usrp.c,v 1.1 2005/11/01 23:12:11 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

/*
 * Compile only this model if usrp is available
 */
#if defined(HAVE_USRP)


#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include "hamlib/rig.h"

#include "usrp_impl.h"
#include "token.h"


#define USRP_MODES (RIG_MODE_NONE)

#define USRP_FUNC (RIG_FUNC_NONE)

#define USRP_LEVEL_ALL (RIG_LEVEL_NONE)

#define USRP_PARM_ALL (RIG_PARM_NONE)

#define USRP_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_C|RIG_VFO_N(3))


static const struct confparams usrp_cfg_params[] = {
      { TOK_IFMIXFREQ, "if_mix_freq", "IF", "IF mixing frequency in Hz",
                  "45000000", RIG_CONF_NUMERIC, { .n = { 0, MHz(400), 1 } }
      },
      { RIG_CONF_END, NULL }
};


/*
 * GNU Radio Universal Software Radio Peripheral
 *
 */

const struct rig_caps usrp_caps = {
.rig_model =  RIG_MODEL_USRP,
.model_name = "USRP",
.mfg_name =  "GNU Radio",
.version =  "0.1",
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_TUNER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_NONE,
.serial_rate_min =  9600,     /* don't care */
.serial_rate_max =  9600,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry = 0,

.has_get_func =  USRP_FUNC,
.has_set_func =  USRP_FUNC,
.has_get_level =  USRP_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(USRP_LEVEL_ALL),
.has_get_parm =  USRP_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(USRP_PARM_ALL),
.level_gran =  {},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  { RIG_CHAN_END, },

.rx_range_list1 =  {
    {kHz(150),MHz(30),USRP_MODES,-1,-1,USRP_VFO},
    {kHz(87.5),MHz(108),RIG_MODE_WFM,-1,-1,USRP_VFO},
      RIG_FRNG_END,
  },
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
    {kHz(150),MHz(30),USRP_MODES,-1,-1,USRP_VFO},
    {kHz(87.5),MHz(108),RIG_MODE_WFM,-1,-1,USRP_VFO},
      RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },
.tuning_steps =  {
       {USRP_MODES,1},
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
            {USRP_MODES, kHz(40)},  /* FIXME */
            RIG_FLT_END,
      },
.cfgparams =  usrp_cfg_params,

.rig_init =  usrp_init,
.rig_cleanup =  usrp_cleanup,
.rig_open =  usrp_open,
.rig_close =  usrp_close,

.set_conf =  usrp_set_conf,
.get_conf =  usrp_get_conf,

.set_freq =  usrp_set_freq,
.get_freq =  usrp_get_freq,
.get_info =  usrp_get_info,

};

#endif      /* HAVE_USRP */

Generated by  Doxygen 1.6.0   Back to index