Logo Search packages:      
Sourcecode: hamlib version File versions

nrd535.c

/*
 *  Hamlib JRC backend - NRD-535 DSP description
 *  Copyright (c) 2001-2004 by Stephane Fillod
 *
 *    $Id: nrd535.c,v 1.14 2005/04/03 19:57:46 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "jrc.h"


#define NRD535_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_ECSS|RIG_MODE_FAX)  /* + FAX */

#define NRD535_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB)

#define NRD535_LEVEL (RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_ATT|RIG_LEVEL_IF|RIG_LEVEL_AGC|RIG_LEVEL_CWPITCH) /*RIG_LEVEL_BWC*/

/* FIXME: add more from "U" command */
#define NRD535_PARM (RIG_PARM_TIME|RIG_PARM_BEEP)

#define NRD535_VFO (RIG_VFO_VFO|RIG_VFO_MEM)

/*
 * NRD-535, specs from http://mods.dk
 *
 * FIXME: measure S-meter levels
 */
#define NRD535_STR_CAL { 16, { \
            {   0, 60 }, \
            {  71, 50 }, \
            {  75, 40 }, \
            {  81, 30 }, \
            {  87, 20 }, \
            {  93, 10 }, \
            { 100,  0 }, \
            { 103, -6 }, \
            { 107, -12 }, \
            { 112, -18 }, \
            { 118, -24 }, \
            { 124, -30 }, \
            { 133, -36 }, \
            { 143, -42 }, \
            { 152, -48 }, \
            { 255, -60 }, \
      } }


/*
 * channel caps.
 */
#define NRD535_MEM_CAP {      \
      .freq = 1,  \
      .mode = 1,  \
      .width = 1, \
      .funcs = RIG_FUNC_FAGC, \
      .levels = RIG_LEVEL_ATT|RIG_LEVEL_AGC, \
}

static const struct jrc_priv_caps nrd535_priv_caps = {
      .max_freq_len = 8,
      .info_len = 14,
      .mem_len = 17,
      .pbs_info_len = 7,
      .pbs_len = 4,
      .beep = 90,
      .beep_len = 2,
      .cw_pitch = "U2"
};

/*
 * NRD-535 rig capabilities.
 *
 */
const struct rig_caps nrd535_caps = {
.rig_model =  RIG_MODEL_NRD535,
.model_name = "NRD-535D",
.mfg_name =  "JRC",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_STABLE,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  4800,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  20,
.timeout =  200,
.retry =  3,

.has_get_func =  NRD535_FUNC,
.has_set_func =  NRD535_FUNC,
.has_get_level =  NRD535_LEVEL,
.has_set_level =  RIG_LEVEL_SET(NRD535_LEVEL),
.has_get_parm =  RIG_PARM_TIME,
.has_set_parm =  RIG_PARM_SET(NRD535_PARM),
.level_gran = {
      [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
      [LVL_ATT] = { .min = { .i = 0 }, .max = { .i = 20 } },
      [LVL_IF] = { .min = { .i = -2000 }, .max = { .i = 2000 } },
      [LVL_CWPITCH] = { .min = { .i = -5000 }, .max = { .i = 5000 } },
      /*[LVL_BWC] = { .min = { .i = 500 }, .max = { .i = 5500 }, .step = { .i = 10} },*/
},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { 20, RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  kHz(2),
.targetable_vfo =  0,
.transceive =  RIG_TRN_RIG,
.vfo_ops =  RIG_OP_FROM_VFO,
.scan_ops =  RIG_SCAN_STOP|RIG_SCAN_SLCT,
.bank_qty =   0,
.chan_desc_sz =  0,
.priv = (void*)&nrd535_priv_caps,

.chan_list =  {
                  { 0, 199, RIG_MTYPE_MEM, NRD535_MEM_CAP },
                  RIG_CHAN_END,
            },

.rx_range_list1 =  {
      {kHz(10),MHz(30),NRD535_MODES,-1,-1,NRD535_VFO},
      RIG_FRNG_END,
  },
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
      {kHz(10),MHz(30),NRD535_MODES,-1,-1,NRD535_VFO},
      RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },

.tuning_steps =  {
       {NRD535_MODES,1},
       {NRD535_MODES,10},
       {NRD535_MODES,100},
       RIG_TS_END,
      },
        /* mode/filter list, .remember =  order matters! */
.filters =  {
            {RIG_MODE_FM, kHz(12)},
            {RIG_MODE_FM, kHz(6)},
            {RIG_MODE_AM|RIG_MODE_ECSS, kHz(6)},
            {RIG_MODE_AM|RIG_MODE_ECSS, kHz(2)},
            {RIG_MODE_AM|RIG_MODE_ECSS, kHz(12)},
            {RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FAX, kHz(2)},
            {RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FAX, kHz(1)},
            {RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FAX, kHz(6)},
            {RIG_MODE_CW, kHz(1)},
            {RIG_MODE_CW, kHz(2)},
            RIG_FLT_END,
      },
.str_cal = NRD535_STR_CAL,

.rig_open =  jrc_open,
.rig_close =  jrc_close,
.set_freq =  jrc_set_freq,
.get_freq =  jrc_get_freq,
.set_mode =  jrc_set_mode,
.get_mode =  jrc_get_mode,
.set_vfo = jrc_set_vfo,
.set_func =  jrc_set_func,
.get_func =  jrc_get_func,
.set_level =  jrc_set_level,
.get_level =  jrc_get_level,
.set_parm =  jrc_set_parm,
.get_parm =  jrc_get_parm,
.get_dcd =  jrc_get_dcd,
.set_trn =  jrc_set_trn,
.reset =  jrc_reset,
.set_mem =  jrc_set_mem,
.get_mem =  jrc_get_mem,
.set_channel =  jrc_set_chan,
.get_channel =  jrc_get_chan,
.vfo_op =  jrc_vfo_op,
.scan =  jrc_scan,
.set_powerstat =  jrc_set_powerstat,
.get_powerstat =  jrc_get_powerstat,
.decode_event =  jrc_decode_event,

};

/*
 * Function definitions below
 */



Generated by  Doxygen 1.6.0   Back to index