Logo Search packages:      
Sourcecode: hamlib version File versions

id1.c

/*
 *  Hamlib CI-V backend - description of ID-1 and variations
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *    $Id: id1.c,v 1.3 2004/09/26 08:35:03 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"

#define ID1_MODES (RIG_MODE_FM /* |RIG_MODE_DIGVOICE|RIG_MODE_DIGDATA*/ )

#define ID1_FUNC_ALL (RIG_FUNC_MUTE|RIG_FUNC_MON|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|RIG_FUNC_AFC)

#define ID1_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RFPOWER|RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR)

#define ID1_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT /* |RIG_PARM_FAN */)

#define ID1_VFO_ALL (RIG_VFO_A)

#define ID1_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ID1_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)

/*
 * FIXME: real measurement
 */
#define ID1_STR_CAL     UNKNOWN_IC_STR_CAL


const struct ts_sc_list id1_ts_sc_list[] = {
            { kHz(5), 0x00 },
            { kHz(10), 0x01 },
            { 12500, 0x02 },
            { kHz(20), 0x03 },
            { kHz(25), 0x04 },
            { kHz(50), 0x05 },
            { kHz(100), 0x06 },
            { kHz(6.25), 0x07 },
            { 0, 0 },
};


/*
 */
static const struct icom_priv_caps id1_priv_caps = { 
            0x01, /* default address */
            0,          /* 731 mode */
            id1_ts_sc_list
};

const struct rig_caps id1_caps = {
.rig_model =  RIG_MODEL_ICID1,
.model_name = "IC ID-1", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER, 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_MOBILE,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  19200,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  ID1_FUNC_ALL,
.has_set_func =  ID1_FUNC_ALL, 
.has_get_level =  ID1_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(ID1_LEVEL_ALL),
.has_get_parm =  ID1_PARM_ALL,
.has_set_parm =  ID1_PARM_ALL,
.level_gran = {
      [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran =  {},
.ctcss_list =  common_ctcss_list,
.dcs_list =  full_dcs_list,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  ID1_VFO_OPS,
.scan_ops =  ID1_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
               {   1,  99, RIG_MTYPE_MEM },
               { 100, 101, RIG_MTYPE_EDGE },    /* two by two */
               { 102, 104, RIG_MTYPE_CALL },
               RIG_CHAN_END,
      },

.rx_range_list1 =   {
      {GHz(1.240),GHz(1.3),ID1_MODES,-1,-1,ID1_VFO_ALL},
      RIG_FRNG_END, },
.tx_range_list1 =  {
      {GHz(1.240),GHz(1.3),ID1_MODES,W(1),W(10),ID1_VFO_ALL},
      RIG_FRNG_END, },

.rx_range_list2 =   {
      {GHz(1.240),GHz(1.3),ID1_MODES,-1,-1,ID1_VFO_ALL},
      RIG_FRNG_END, },
.tx_range_list2 =  {
      {GHz(1.240),GHz(1.3),ID1_MODES,W(1),W(10),ID1_VFO_ALL},
      RIG_FRNG_END, },

.tuning_steps =   {
       {ID1_MODES,kHz(5)},
       {ID1_MODES,kHz(10)},
       {ID1_MODES,12500},
       {ID1_MODES,kHz(20)},
       {ID1_MODES,kHz(25)},
       {ID1_MODES,kHz(25)},
       {ID1_MODES,kHz(100)},
       {ID1_MODES,kHz(6.25)},
       RIG_TS_END,
      },
      /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_FM, kHz(12)},
#if 0
            {RIG_MODE_DIGVOICE, kHz(6)},
            {RIG_MODE_DIGDATA, kHz(140)},
#endif
            RIG_FLT_END,
      },
.str_cal = ID1_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&id1_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_level =  icom_set_level,
.get_level =  icom_get_level,
.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.set_ptt =  icom_set_ptt,
.get_ptt =  icom_get_ptt,
.get_dcd =  icom_get_dcd,
.set_ts =  icom_set_ts,
.set_rptr_shift =  icom_set_rptr_shift,
.set_rptr_offs =  icom_set_rptr_offs,
.get_rptr_offs =  icom_get_rptr_offs,

};


Generated by  Doxygen 1.6.0   Back to index