Logo Search packages:      
Sourcecode: hamlib version File versions

r5000.c

/*
 *  Hamlib Kenwood backend - R5000 description
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *    $Id: r5000.c,v 1.3 2005/04/03 20:14:26 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"


#define R5000_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)

#define R5000_FUNC_ALL (RIG_FUNC_LOCK)

#define R5000_LEVEL_ALL RIG_LEVEL_NONE

#define R5000_PARM_ALL (RIG_PARM_TIME)

#define R5000_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)

#define R5000_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)

#define R5000_SCAN_OPS (RIG_SCAN_VFO)

#define R5000_ANTS (RIG_ANT_1|RIG_ANT_2)

static const struct kenwood_priv_caps  r5000_priv_caps  = {
      .cmdtrm =  EOM_KEN,
      .if_len =  33,
};

/*
 * R5000 rig capabilities, with IF-10 interface (like TS440).
 *
 * TODO: scan, get/set_channel, RIT
 */
const struct rig_caps r5000_caps = {
.rig_model =  RIG_MODEL_R5000,
.model_name = "R-5000",
.mfg_name =  "Kenwood",
.version =  IC10_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  4800,
.serial_data_bits =  8,
.serial_stop_bits =  2,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  2,
.timeout =  400,
.retry =  3,

.has_get_func =  R5000_FUNC_ALL,
.has_set_func =  R5000_FUNC_ALL,
.has_get_level =  R5000_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(R5000_LEVEL_ALL),
.has_get_parm =  R5000_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(R5000_PARM_ALL), 
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops =  R5000_VFO_OPS,
.scan_ops =  R5000_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,


.chan_list =  { {   0,  99, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} }, /* TBC */
           RIG_CHAN_END, },

.rx_range_list1 =  {
      {kHz(100),MHz(30),R5000_ALL_MODES,-1,-1,R5000_VFO},
      {MHz(108),MHz(174),R5000_ALL_MODES,-1,-1,R5000_VFO},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
      {kHz(100),MHz(30),R5000_ALL_MODES,-1,-1,R5000_VFO},
      {MHz(108),MHz(174),R5000_ALL_MODES,-1,-1,R5000_VFO},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  { RIG_FRNG_END, }, /* tx range */

.tuning_steps =  {
       {R5000_ALL_MODES,10},
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
            {RIG_MODE_AM, kHz(6)},
            {RIG_MODE_FM, kHz(12)},
            RIG_FLT_END,
      },
.priv =  (void *)&r5000_priv_caps,

.set_freq =  ic10_set_freq,
.get_freq =  ic10_get_freq,
.set_mode =  ic10_set_mode,
.get_mode =  ic10_get_mode,
.set_vfo =  ic10_set_vfo,
.get_vfo =  ic10_get_vfo,
.set_func =  ic10_set_func,
.get_func =  ic10_get_func,
.set_parm =  ic10_set_parm,
.get_parm =  ic10_get_parm,
.set_ant =  ic10_set_ant,
.get_ant =  ic10_get_ant,
.set_mem =  ic10_set_mem,
.get_mem =  ic10_get_mem,
.vfo_op =  ic10_vfo_op,
.set_trn =  ic10_set_trn,
.get_trn =  ic10_get_trn,
.scan =  ic10_scan,
.set_channel =  ic10_set_channel,
.get_channel =  ic10_get_channel,
.set_powerstat =  ic10_set_powerstat,
.get_powerstat =  ic10_get_powerstat,
.get_info = ic10_get_info,
.decode_event = ic10_decode_event,

};

/*
 * Function definitions below
 */


Generated by  Doxygen 1.6.0   Back to index