Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

ic718.c
/*
 *  Hamlib CI-V backend - description of IC-718 caps
 *  Copyright (c) 2000-2010 by Stephane Fillod
 *  Caps submitted by Chuck Gilkes WD0FCL/4
 *
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"
#include "bandplan.h"


#define IC718_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC718_1MHZ_TS_MODES (RIG_MODE_AM)
#define IC718_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)

/* tx doesn't have WFM.
 * 100W in all modes but AM (40W)
 */ 
#define IC718_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC718_AM_TX_MODES (RIG_MODE_AM)

#define IC718_FUNC_ALL (RIG_FUNC_NR|RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_ANF)

#define IC718_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_MICGAIN|RIG_LEVEL_NR|RIG_LEVEL_CWPITCH|RIG_LEVEL_KEYSPD|RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_RAWSTR|RIG_LEVEL_SQL)

#define IC718_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)

#define IC718_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)

#define IC718_SCAN_OPS (RIG_SCAN_MEM)

/*
 * TODO: check whether func and levels are stored in memory
 */
#define IC718_MEM_CAP {    \
        .freq = 1,  \
        .mode = 1,  \
        .width = 1, \
        .tx_freq = 1,   \
        .tx_mode = 1,   \
        .tx_width = 1,  \
}

#define IC718_STR_CAL UNKNOWN_IC_STR_CAL



static const struct icom_priv_caps IC718_priv_caps = { 
            0x5e, /* default address */
            0,          /* 731 mode */
            ic718_ts_sc_list
};

const struct rig_caps ic718_caps = {
.rig_model =  RIG_MODEL_IC718,
.model_name = "IC-718", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER ".1",
.copyright =  "LGPL",
.status =  RIG_STATUS_BETA,
.rig_type =   RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  IC718_FUNC_ALL,
.has_set_func =  IC718_FUNC_ALL, 
.has_get_level =  IC718_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(IC718_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran = {
      [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
      },
.parm_gran =  {},
.str_cal = IC718_STR_CAL,
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { 10, RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  IC718_VFO_OPS,
.scan_ops =  IC718_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
               {   1,  99, RIG_MTYPE_MEM,  IC718_MEM_CAP },
               { 100, 101, RIG_MTYPE_EDGE, IC718_MEM_CAP },    /* two by two */
                 RIG_CHAN_END,
            },

.rx_range_list1 =   { {kHz(30),MHz(30)-1,IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL},
             RIG_FRNG_END, },
.tx_range_list1 =   {
    FRQ_RNG_HF(1, IC718_OTHER_TX_MODES, W(5),W(100),IC718_VFO_ALL,RIG_ANT_1),
    FRQ_RNG_HF(1, IC718_AM_TX_MODES,    W(2),W(40), IC718_VFO_ALL,RIG_ANT_1), /* AM class */
    RIG_FRNG_END,
},

.rx_range_list2 =   { {kHz(30),MHz(30)-1,IC718_ALL_RX_MODES,-1,-1,IC718_VFO_ALL},
             RIG_FRNG_END, },
.tx_range_list2 =  {
    FRQ_RNG_HF(2, IC718_OTHER_TX_MODES, W(5),W(100),IC718_VFO_ALL,RIG_ANT_1),
    FRQ_RNG_HF(2, IC718_AM_TX_MODES,    W(2),W(40), IC718_VFO_ALL,RIG_ANT_1), /* AM class */
    RIG_FRNG_END,
},

.tuning_steps =   {
       {IC718_1HZ_TS_MODES,1},
       {IC718_ALL_RX_MODES,10},
       {IC718_ALL_RX_MODES,100},
       {IC718_ALL_RX_MODES,kHz(1)},
       {IC718_ALL_RX_MODES,kHz(5)},
       {IC718_ALL_RX_MODES,kHz(9)},
       {IC718_ALL_RX_MODES,kHz(10)},
       {IC718_ALL_RX_MODES,kHz(100)},
       RIG_TS_END,
      },
      /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.1)},   /* bultin */
            {RIG_MODE_CW|RIG_MODE_RTTY, Hz(500)},                 /* FL-52A */
            {RIG_MODE_CW|RIG_MODE_RTTY, Hz(250)},                 /* FL-53A */
            {RIG_MODE_SSB, kHz(2.8)},                       /* FL-96  */
            {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(1.8)},     /* FL-222 */
            {RIG_MODE_AM, kHz(6)},                          /* mid w/ bultin FL-94 */
            {RIG_MODE_AM, kHz(2.4)},                        /* narrow w/ bultin FL-272 */
            RIG_FLT_END,            
      },

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&IC718_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_level =  icom_set_level,
.get_level =  icom_get_level,
.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.get_dcd =  icom_get_dcd,
.set_ts =  icom_set_ts,
.get_ts =  icom_get_ts,
.set_split_freq =  icom_set_split_freq,
.get_split_freq =  icom_get_split_freq,
.set_split_mode =  icom_set_split_mode,
.get_split_mode =  icom_get_split_mode,
.set_split_vfo =  icom_set_split_vfo,
.get_split_vfo =  icom_mem_get_split_vfo,

};



Generated by  Doxygen 1.6.0   Back to index