Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

ra3702.c

/*
 *  Hamlib Racal backend - RA3702 description
 *  Copyright (c) 2010 by Stephane Fillod
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "ra37xx.h"


/* TODO: ISB */
#define RA3702_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)

#define RA3702_FUNC (RIG_FUNC_MUTE)

#define RA3702_LEVEL_ALL (RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_AGC|\
        RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)

#define RA3702_PARM_ALL (RIG_PARM_NONE)

#define RA3702_VFO (RIG_VFO_A)

#define RA3702_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define RA3702_SCAN_OPS (RIG_SCAN_STOP|RIG_SCAN_VFO|RIG_SCAN_MEM)

/*
 * ra3702 rig capabilities.
 *
 * Required A6A1 serial asynchronous interface
 *
 */
const struct rig_caps ra3702_caps = {
.rig_model =  RIG_MODEL_RA3702,
.model_name = "RA3702",
.mfg_name =  "Racal",
.version =  "0.1",
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  50,
.serial_rate_max =  9600,
.serial_data_bits =  7,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_EVEN,
.serial_handshake =  RIG_HANDSHAKE_XONXOFF,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  RA37XX_TIMEOUT,
.retry =  2,

.has_get_func =  RA3702_FUNC,
.has_set_func =  RA3702_FUNC,
.has_get_level =  RA3702_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(RA3702_LEVEL_ALL),
.has_get_parm =  RA3702_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(RA3702_PARM_ALL),
.level_gran = {
        [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.vfo_ops =  RA3702_VFO_OPS,
.scan_ops =  RA3702_SCAN_OPS,
.preamp =   { 20, RIG_DBLST_END }, /* FIXME */
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  0,
.str_cal = RA37XX_STR_CAL,

.chan_list =  {
    {   0,  99, RIG_MTYPE_MEM, RA37XX_MEM_CAP },
    RIG_CHAN_END,
},

.rx_range_list1 =  {
      {kHz(15),MHz(30)-1,RA3702_MODES,-1,-1,RA3702_VFO},
      RIG_FRNG_END,
  },
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
      {kHz(15),MHz(30)-1,RA3702_MODES,-1,-1,RA3702_VFO},
      RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },
.tuning_steps =  {
       {RA3702_MODES,1},
       {RA3702_MODES,10},
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
            /* at -3dB */
            {RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.7)},
            {RA3702_MODES, kHz(12)},
            {RA3702_MODES, kHz(6)}, 
            {RA3702_MODES, Hz(300)},
            {RA3702_MODES, kHz(1)},
            {RA3702_MODES, kHz(2.7)},
            //{RA3702_MODES, 0},    /* accept any BW */
            RIG_FLT_END,
      },

.cfgparams = ra37xx_cfg_params,

.rig_init =  ra37xx_init,
.rig_cleanup =  ra37xx_cleanup,
.rig_open =  ra37xx_open,
.rig_close =  ra37xx_close,
.set_conf =  ra37xx_set_conf,
.get_conf =  ra37xx_get_conf,

.set_freq =  ra37xx_set_freq,
.get_freq =  ra37xx_get_freq,
.set_mode =  ra37xx_set_mode,
.get_mode =  ra37xx_get_mode,
.set_func =  ra37xx_set_func,
.get_func =  ra37xx_get_func,
.set_level =  ra37xx_set_level,
.get_level =  ra37xx_get_level,

.set_ant =  ra37xx_set_ant,
.get_ant =  ra37xx_get_ant,
.set_mem =  ra37xx_set_mem,
.get_mem =  ra37xx_get_mem,

.scan = ra37xx_scan,
.vfo_op = ra37xx_vfo_op,
.get_info = ra37xx_get_info,

};

/*
 * Function definitions below
 */


Generated by  Doxygen 1.6.0   Back to index