Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

k3.c

/*
 *  Hamlib Kenwood backend - Elecraft K3 description
 *  Copyright (c) 2002-2009 by Stephane Fillod
 *
 *    $Id: k3.c,v 1.4 2009-02-10 22:51:21 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kenwood.h"
#include "bandplan.h"


#define K3_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
            RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_AM)

#define K3_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_LOCK)

#define K3_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_PREAMP|RIG_LEVEL_AGC|RIG_LEVEL_SQL|\
              RIG_LEVEL_STRENGTH|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|\
            RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_MICGAIN)

#define K3_VFO (RIG_VFO_A|RIG_VFO_B)
#define K3_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)

#define K3_ANTS (RIG_ANT_1|RIG_ANT_2)


static struct kenwood_priv_caps  k3_priv_caps  = {
            .cmdtrm =  EOM_KEN,
};

/*
 * KIO3 rig capabilities.
 * This kit can recognize a large subset of TS-570/K2 commands.
 *
 * part of infos comes from http://www.elecraft.com
 */
const struct rig_caps k3_caps = {
.rig_model =  RIG_MODEL_K3,
.model_name = "K3",
.mfg_name =  "Elecraft",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_BETA,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  38400,
.serial_data_bits =  8,
.serial_stop_bits =  2,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  600, /* FA and FB make take up to 500 ms on band change */
.retry =  3,

.has_get_func =  K3_FUNC_ALL,
.has_set_func =  K3_FUNC_ALL,
.has_get_level =  K3_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(K3_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,    /* FIXME: parms */
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.preamp =   { 14, RIG_DBLST_END, },
.attenuator =   { 10, RIG_DBLST_END, },
.max_rit =  Hz(9990),
.max_xit =  Hz(9990),
.max_ifshift =  Hz(0),
.vfo_ops =  K3_VFO_OP,
.targetable_vfo =  RIG_TARGETABLE_FREQ,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  { RIG_CHAN_END },

.rx_range_list1 =  { 
      {kHz(500),MHz(30),K3_MODES,-1,-1,K3_VFO,K3_ANTS},
      { MHz(48),MHz(54),K3_MODES,-1,-1,K3_VFO,K3_ANTS},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list1 =  {
      FRQ_RNG_HF(1,K3_MODES,mW(10),W(10),K3_VFO,K3_ANTS),
      FRQ_RNG_6m(1,K3_MODES,mW(10),W(10),K3_VFO,K3_ANTS),
      RIG_FRNG_END,
  }, /* tx range */

.rx_range_list2 =  {
      {kHz(500),MHz(30),K3_MODES,-1,-1,K3_VFO,K3_ANTS},
      { MHz(48),MHz(54),K3_MODES,-1,-1,K3_VFO,K3_ANTS},
      RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  {
      FRQ_RNG_HF(2,K3_MODES,mW(10),W(10),K3_VFO,K3_ANTS),
      FRQ_RNG_6m(2,K3_MODES,mW(10),W(10),K3_VFO,K3_ANTS),
      RIG_FRNG_END,
  }, /* tx range */
.tuning_steps =  {
       {K3_MODES,1},
       RIG_TS_END,
      },
        /* mode/filter list, remember: order matters! */
.filters =  {
            {RIG_MODE_SSB, kHz(2.5)},
            {RIG_MODE_CW|RIG_MODE_CWR, Hz(500)},
            {RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(500)},
            {RIG_MODE_AM, kHz(6)},
            {RIG_MODE_FM, kHz(6)}, /* TBC */
            RIG_FLT_END,
      },
.priv =  (void *)&k3_priv_caps,

.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq =  kenwood_set_freq,
.get_freq =  kenwood_get_freq,
.set_mode =  kenwood_set_mode,
.get_mode =  kenwood_get_mode,
.set_vfo =  kenwood_set_vfo,
.get_vfo =  kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split_vfo,
.get_split_vfo = kenwood_get_split_vfo_if,
.set_rit =  kenwood_set_rit,
.get_rit =  kenwood_get_rit,
.set_xit =  kenwood_set_xit,
.get_xit =  kenwood_get_xit,
.get_ptt =  kenwood_get_ptt,
.set_ptt =  kenwood_set_ptt,
.get_dcd =  kenwood_get_dcd,
.set_func =  kenwood_set_func,
.get_func =  kenwood_get_func,
.set_level =  kenwood_set_level,
.get_level =  kenwood_get_level,
.vfo_op =  kenwood_vfo_op,
.set_trn =  kenwood_set_trn,
.get_trn =  kenwood_get_trn,
.set_powerstat =  kenwood_set_powerstat,
.get_powerstat =  kenwood_get_powerstat,
.set_ant =  kenwood_set_ant,
.get_ant =  kenwood_get_ant,
.send_morse =  kenwood_send_morse,

};


/*
 * Function definitions below
 */


Generated by  Doxygen 1.6.0   Back to index