Logo Search packages:      
Sourcecode: hamlib version File versions  Download package

pcr1000.c

/*
 *  Hamlib PCR backend - PCR-1000 description
 *  Copyright (c) 2001-2009 by Stephane Fillod and Darren Hatcher
 *
 *    $Id: pcr1000.c,v 1.11 2009-01-27 19:05:59 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>

#include "pcr.h"
#include "idx_builtin.h"

#define PCR1000_MODES ( RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM | RIG_MODE_CW | RIG_MODE_SSB )

#define PCR1000_FUNC ( RIG_FUNC_NB | RIG_FUNC_TSQL | RIG_FUNC_NB | \
            RIG_FUNC_ANF | RIG_FUNC_NR | RIG_FUNC_AFC )

#define PCR1000_LEVEL ( \
                  RIG_LEVEL_ATT | RIG_LEVEL_AF | RIG_LEVEL_SQL | RIG_LEVEL_IF | \
                  RIG_LEVEL_AGC | RIG_LEVEL_STRENGTH | RIG_LEVEL_RAWSTR | \
                  RIG_LEVEL_NR )

/*
 * IC PCR1000 rigs capabilities.
 */
const struct rig_caps pcr1000_caps = {
      .rig_model        = RIG_MODEL_PCR1000,
      .model_name       = "IC-PCR1000",
      .mfg_name         = "Icom",
      .version          = BACKEND_VER,
      .copyright        = "LGPL",
      .status                 = RIG_STATUS_ALPHA,

      .rig_type         = RIG_TYPE_PCRECEIVER,
      .ptt_type         = RIG_PTT_NONE,
      .dcd_type         = RIG_DCD_RIG,
      .port_type        = RIG_PORT_SERIAL,

      .serial_rate_min  = 300,
      .serial_rate_max  = 38400,
      .serial_data_bits = 8,
      .serial_stop_bits = 1,
      .serial_parity          = RIG_PARITY_NONE,
      .serial_handshake = RIG_HANDSHAKE_NONE,

      .write_delay            = 12,
      .post_write_delay = 0,
      .timeout          = 300,
      .retry                  = 3,

      .has_get_func           = PCR1000_FUNC,
      .has_set_func           = PCR1000_FUNC,
      .has_get_level          = PCR1000_LEVEL,
      .has_set_level          = RIG_LEVEL_SET(PCR1000_LEVEL),
      .has_get_parm           = RIG_PARM_NONE,
      .has_set_parm           = RIG_PARM_NONE,

      .level_gran = {
            [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
            /* XXX check this */
            [LVL_IF] = { .min = { .i = -1270 }, .max = { .i = 1270 }, .step = { .i = 10 } },
      },
      .parm_gran        = {},

      .ctcss_list       = pcr_ctcss_list,
      .dcs_list         = NULL,
      .preamp                 = { RIG_DBLST_END },
      .attenuator       = { 20, RIG_DBLST_END },

      .max_rit          = Hz(0),
      .max_xit          = Hz(0),
      .max_ifshift            = kHz(1.2),

      .targetable_vfo         = 0,
      .transceive       = RIG_TRN_RIG,
      .bank_qty         = 0,
      .chan_desc_sz           = 0,
      .chan_list        = { RIG_CHAN_END },

      .rx_range_list1 = {
            { kHz(10), GHz(1.3), PCR1000_MODES, -1, -1, RIG_VFO_A},
            RIG_FRNG_END
      },
      .tx_range_list1 = { RIG_FRNG_END },
      .rx_range_list2 = {
            { kHz(10), MHz(824) - 10, PCR1000_MODES, -1, -1, RIG_VFO_A },
            { MHz(849) + 10, MHz(869) - 10, PCR1000_MODES, -1, -1, RIG_VFO_A },
            { MHz(894) + 10, GHz(1.3), PCR1000_MODES, -1, -1, RIG_VFO_A },
             RIG_FRNG_END
      },
      .tx_range_list2 = { RIG_FRNG_END }, /* no TX ranges, this is a receiver */

      .tuning_steps = {
                   { PCR1000_MODES, Hz(1) },
                   RIG_TS_END,
      },
      /* mode/filter list, remember: order matters! */
      .filters = {
                { RIG_MODE_FM | RIG_MODE_AM, kHz(15) },
                { RIG_MODE_FM | RIG_MODE_AM, kHz(6) },
                { RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_AM,
                 kHz(2.8)},
                { RIG_MODE_WFM, kHz(230) },
                { RIG_MODE_WFM | RIG_MODE_FM | RIG_MODE_AM, kHz(50) },
                RIG_FLT_END,
      },

      .priv = NULL,

      /* XXX fake */
      .str_cal = { 3, { { 0, -60 }, { 127, 0 }, { 255, 60 } } },

      .rig_init   = pcr_init,
      .rig_cleanup      = pcr_cleanup,
      .rig_open   = pcr_open,
      .rig_close  = pcr_close,

      .set_freq   = pcr_set_freq,
      .get_freq   = pcr_get_freq,
      .set_mode   = pcr_set_mode,
      .get_mode   = pcr_get_mode,

      .get_info   = pcr_get_info,

      .set_level  = pcr_set_level,
      .get_level  = pcr_get_level,

      .set_func   = pcr_set_func,
      .get_func   = pcr_get_func,

      .set_ctcss_sql    = pcr_set_ctcss_sql,
      .get_ctcss_sql    = pcr_get_ctcss_sql,

      .set_trn    = pcr_set_trn,
      .decode_event     = pcr_decode_event,

    .set_powerstat  = pcr_set_powerstat,
    .get_powerstat  = pcr_get_powerstat,
};

Generated by  Doxygen 1.6.0   Back to index